So, who plan to make one ?

Reply

Awrr any comments ?

Reply

Does someone has the step by step for this?

Reply

Yes i do, well i made this one and took the pic myself.
1 . Go to home depot, buy all the pipe parts in the galvanized pipe section.
( http://www.homedepot.com/h_d1/N-5yc1vZbuu8/h_d2/Navigation?catalogId=10053&langId=-1&storeId=10051 )
2. Just look at the pipe on the pic its kinda simple when your at home depot to figure out and even assemble 1 leg on the spot to make it the length that you want it.
3. Assemble by ... putting them together no tools required at all.
4. When the frame is finish, spray a primer, and after spray you matte black finishing color.
5. Find or go to your local woodshop and buy a hard piece of wood for the top. Mine as show in the pic cost 100$ and was custom made 2 inch thick of solid wood.

Reply

Dam we can edit our comment, For the finishing I woud also recommend.

6. Put 1-2 dip of grazy glue in each connection so they dont get loose when you move the table around.

7. When you make your leg length dont forget to consider that you will add 2 inch of wood on the top.

8. I really recommend to spray paint it black, even if your pipe are black, it give the frame a more ... finished look.

9. At home demo you can assemble your kit on the spot if you want. At the cash you end up whit like 35 piece of iron pipe ...

Reply

More close up, to help you figure it out.
http://oi45.tinypic.com/15ow3o1.jpg

Reply

Julien - Nicely done. What did you use for the top and bottom of the legs? Were those from the pipe area also? Also, did you just use wood screws to attach the legs to the table?

Reply

Yes, you can find all the pipe part at home depot in the galvanized pipe section. The bottom and top for the leg are ( http://www.homedepot.com/p/3-4-in-Black-Malleable-Iron-Threaded-Floor-Flange-521-604HN/100129872?N=bqn5#.UXF1eYJOTwo ).

And yes its just regular wood screw, the hole on the pipe fitting are already made for 4 screw. You can see it in this pic ( http://oi45.tinypic.com/15ow3o1.jpg )

Reply

My step by step here is more clear. I know on gentlemint its confusing but take a look at my step by step instruction here. http://nothing-z3n.deviantart.com/art/Iron-Table-362667899

Reply